Lighting

Splitting the difference between the previous Flux 800 and 900, the Flux 850 gets the game-changing Mode Shift found on the Flux 1250. This means there are three steady modes, all using both the wide and spot beams. Go from Steady Low to Steady High in a single push, without cycling through a flash mode. Press-and-hold for two seconds and you get into the secondary modes: Steady Flash to be seen in busy urban environments, Flash Mode for endless runtime, and two Flashlight modes with 10 and 20 hours of runtime for hanging around the campsite, or when you forget to charge your light and need to conserve the last few percent of battery life to get home. IPX7 waterproof means this light can survive being submerged 1 meter deep for 30 minutes. No, it's not meant for scuba diving. But is can handle anything you can throw at it on two wheels. - Sculpted double beam pattern uses separate optics for wide and spot beams to put light where you need it and maximizes every lumen. The result is a beam pattern that torch-style lights can't touch. - 1x CREE XP-L High Intensity LED plus 1x CREE XP-G LED. - Quick-release bar mount works on 22.2, 25.4, and 31.8mm bars to put the light above, below, or in front the stem to clear cables and computer mounts. - Extra bright side lights to give you 180-degree visibility to other cyclists and motorists. - 2600mAh Li-ion internal battery is USB rechargeable via included micro USB cable. - Depending on mode, up to an additional three hours of super-low output are available when listed runtimes expire. Trust us, someday you'll need this. - Steady High mode: 850 lumens for 1:30 hours - Steady Medium mode: 450 lumens for 3:00 hours - Steady Low mode: 250 lumens for 6:00 hours - Press-and-hold to turn off, long press-and-hold to enter secondary modes. - Steady Flash mode: 300 + 200 lumens for 4:00 hours - Daytime Flash mode: 400 lumens for 20:00 hours - Very low mode: 100 lumens for 10:00 hours - Super low mode: 50 lumens for 20:00 hours - Extra-long press-and-hold to lockout light for travelling.

Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g

FEATURES - USB Rechargeable - Strap Fits Bars 20-40mm - Waterproof - Micro USB Cable Included - 240° Visibility SPECS - Modes: High: 3 hrs, Medium: 6 hrs, Slow Flash: 50 hrs, & Quick Flash: 40 hrs - Weight: 29 Grams with Bracket - Runtime: Up to 50 hrs on Flash - Battery: Lithium Polymer

The Apollo is a waterproof super bright LED light that is small and easy to mount. FEATURES - USB Rechargeable - Strap Fits Bars 20-40mm - Waterproof - Micro USB Cable Included - 240° Visibility SPECS - Modes: High: 3 hrs, Medium: 6 hrs, Slow Flash: 50 hrs, & Quick Flash: 40 hrs - Weight: 29 Grams with Bracket - Runtime: Up to 50 hrs on Flash - Battery: Lithium Polymer

USM-600 E-Lume 600 Lumen Headlight - All-In-One Design - Extruded Aluminum Body - Press and Hold Button Lock - Daytime Flash Mode - Up To 90 Hours Runtime - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - USB Charging Cable - E-Lume Headlight User Manual (PDF) UTM-60 Cosmo 60 Lumen Tail Light - 270 Degree High Visibility Design - Highly Adjustable Mounting System - Daytime Flash Mode - 5 Modes: 2 Solid / 3 Flash - Micro USB Rechargeable

Largest Easy-Touch Button In The Industry Keep focused on the trail instead of hunting for buttons. Designed for simplified no-look use, especially when helmet mounted, with easy touch oversized five-point button sensor and LED backlit battery level meter. - USB-C Charging - Go-Pro® and Bar Bracket Included. Rugged looks with impressive light output and smart features, our all new completely redesigned Serfas© True Series MTB headlights will illuminate your path. The Serfas© True 1300 MTB features 1300 lumens of crystal clear bright night time illumination to make out every turn of the trail and 1300 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra large power button with LED backlit battery level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. Go-Pro® and Bar Bracket Included. TSL Headlight Models w/ Button Lock – True Series Headlight User Manual Limited Lifetime Warranty Serfas® warrants to the original purchaser that the product is free of defects in material, construction, and/or workmanship for the lifetime of the product. Battery Warranty – One Year Coverage Serfas® batteries are covered by a 1 year warranty from the original date of purchase. Features: - 1300 Lumen Output - Oversize Easy-Touch Power/Mode Button - Backlit LED Battery Level Indicator - USB-C Charge Port w/ 1A Fast Charging - Last Mode Memory (In Solid Mode) - Go-Pro® and Bar Bracket Included - Removable Li-Ion Battery - Convenient Magnetic Battery Removal - No Tools Required Installation - IPX6 Water Resistance Rating Specs: Solid Mode: - High 1300 Lumens – 1.5 hrs - Medium 650 Lumens – 3.25 hrs - Low 320 Lumens – 7 hrs Flash Mode: - Daytime Flash 1300 Lumens – 49 hrs - Low Flash 190 Lumens – 51 hrs Weight : 128 Grams w/ Bracket Battery: 1-Cell Li-Ion, 3350 mAh Charge Time: 4.5 hrs (Using 2A USB Wall Charger) Color: Black *USB Charging: To ensure stable charging please be sure the USB-C male connection is fully and firmly clicked into place in the headlight's USB-C female charge receptacle to ensure a properly secured connection (an audible click will not always be heard). The integrated headlight battery charge level indicator will display five solidly illuminated blue LED dots when full charge is achieved.

FEATURES - Super Bright (50 Lumens) *Daytime Flash - Last Mode Memory - Auto Safe Mode - USB Remote Switch Compatible - USB Rechargeable - Up to 19.5 hrs Runtime - Aero Bar Compatible Bracket SPECS - Solid Modes: High (25 Lumens): 1.5 hrs, Medium (15 Lumens): 2.25 hrs, Low (10 Lumens): 5.5 hrs - Flash Modes: *Daytime Flash (50 Lumens): 19.5 hrs, High Flash Slow (25 Lumens): 9.5 hrs, High Flash Fast (25 Lumens): 5 hrs, Low Flash (10 Lumens): 13 hrs, Auto Safe Mode Extends Runtime an Additional 45mins - Weight: 40 Grams with Bracket - Battery: 500 mAh Lithium Polymer

A bright and reliable urban bike light combo set. These lights provide cyclists with all the modes to stay bright as they pedal around town day or night. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX5 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Grateful Red specs: - PB 28 LED Power Array provide steady, Courtesy and Superflash modes - FL1 tested Run times: 26 hrs (steady – 13 lm), 45 hrs (Courtesy - 4-11 lm) and up to 150 hrs (Superflash - 13 lm) - Provide 160° of visibility - Highly visible, even in daylight - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes rear rack and seat post mounts plus rear clip for multiple mounting options - 85 grams

If you’re looking for a compact urban bike light combo set at a great price, look no farther than this pairing. We’ve teamed up the compact 80 lumen Beamer 80 headlight with the bright and super-efficient Blinky 3 tail light. Both front and rear lights boast generous run times and have all the steady and flashing modes you need to be noticed as you explore by bike after dark. Beamer 80 specs: - High output surface mounted LED provides high power beam along with Courtesy and Superflash modes - FL1 run times: 6.5 hrs (steady – 80 lm), 24 hrs (Courtesy - 24-72 lm) and up to 70 hrs (Superflash - 80 lm) - Provides 130° of visibility - Water resistance rated to IPX4 standard - 2 AAA batteries (included) - A3 cam bracket mounts, adjusts or removes without tools - 63 grams Blinky 3 specs: - 3 - 5mm LEDs adn built-in parabolic lensing provide steady and flashing modes - FL1 tested Run times: 70 hrs (steady – 12 lm), and up to 140 hrs (flash - 12lm) - Provide 140° of visibility - Water resistance rated to IPX3 standard - 2 AAA batteries (included) - Includes seat post and seat stay mounts plus rear clip for multiple mounting options - 68 grams

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Stand out at night! The Blinky 3H combines 3 bright LEDs with a parabolic reflector for up to a mile of visibility. And, its self-leveling helmet mount ensures optimum visibility as you ride. It also includes seatpost and seatstay mounts. The Blinky 3H has steady and flashing modes and runs for up to 100 hours on the included AAA battery. Also, this light includes a reflective lens and side reflective strips for extra safety.

The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

-PB power array and reflector provide visibility for up to 1 mile -Steady, Superflash and Courtesy flash modes -Ultra compact case is weatherproof, lightweight, and durable -Rear rack and seat post mounts included -Up to 150 hours of run time on 2 AAA batteries (included) -85 grams

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

The NiteRider Lumina 1000 Boost is the perfect light for mountain bikers, road riders, adventure riders and urban commuters. Featuring a tried and true handlebar mount (fits up to 35mm) that is sure to remain rock solid whether on the trail or pavement. Double clicking the power button activates Boost Mode, giving you the option to operate your light at 1000 lumens maximum light output! This self-contained light makes use of the IntelliCharge function, which charges the battery twice as fast as the normal charge rate when connected to a higher amp AC adapter. With the new NiteRider custom engineered collimator lens, the Lumina 1000 Boost projects a wide and even beam pattern of 1000 lumens! The NiteRider Sabre 80 is a super bright, lightweight USB rechargeable LED tail light. It utilizes a multi LED array designed for eye catching visibility in both day and night. With the addition of amber colored side lights, the Sabre 80 provides 180 degrees of protection. LUMINA 1000 BOOST - All New Collimator Lens, produces a generous even widespread beam - Boost Mode, double click power button to unleash maximum LED output - 5 Light Levels plus 2 Daylight Flash Modes - CREE LED at 6000k - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Lumina 1000 Boost and Sabre 80 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1000 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 1500 - Battery: Li-Ion - Recharge Type: USB

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

These handy little handlebar accessories are activated by your bike's motion, so they're ready to go whenever you are! - Motion-activated lights - One LED per plug - Mounts easily into standard (17.5–19mm internal diameter) handlebars

Blinder 1300 is precise, powerful, long-lasting and the perfect choice for road and gravel cyclists who demand the very best performance from their equipment. Combining robust CNC construction, compact design, perfect beam angles, an incredible weight-to-power ratio and multiple mounting options, Blinder 1300 front bike light raises the bar by which front bike lights are measured. A powerful front light with multiple mounting options, long lasting battery life and a compact & lightweight form. - Produces a powerful 1300 lumen road focused beam - Provides quality illumination up to 120m - Industry leading battery tech provides 1.5 hrs runtime on full brightness - Up to 120 hours runtime on Eco Flash mode - Includes two mounts; a tough rubber strap for over / under the handlebar, and a Go-Pro style mount for mounting under a computer or to a compatible helmet mount. - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility

Describing this light as bright is a serious under-statement. Using new COB technology, Blinder Grid produces a punchy 100 lumens that will ensure you're seen and safe in all light conditions. It features a grid pattern that makes this Blinder one of Knog's most individual lights ever. The graphic flash pattern has 8 different modes and is also available as a front light to make a unique pair. The Blinder Grid has integrated USB recharging, is 100% waterproof and has a whopping 60 hour run-time when using eco flash mode. INTEGRATED USB PLUG No charging cable is required for your Blinder, its integrated USB plugs directly into USB ports. It has a charge time of 4 hours. When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. TOOL-LESS MOUNT Blinder lights comes with a tool-less removable silicone straps for bars and seat posts 22 – 32mm in diameter. A large strap is also provided that will fit tubes and head tube profiles with a circumference of up to 200mm. Knog's tool-less mounting system makes attaching your light incredibly simple and using silicone straps means there'll be no chance of damaging your bikes frame or beloved paint job. EASY ON, EASY OFF Removing your Blinder for charging or security purposes is a doddle with our handy clasp removal system. Strong enough to hold your light firmly in place when in use and big enough to use even when wearing gloves in colder conditions, this is a king amongst clasps. BLINDINGLY BRIGHT Producing 100 lumens of light output makes this Blinder a seriously bright option for any cyclist. Efficient Chip on Board (COB) LEDs provide maximum brightness level for up to 90% of the battery burn time. - Dimensions: H: 43mm x W: 43mm x L:46mm - Weight: 34 grams - Charge Time: 4 hours - Lumens: 100

The Blinder Road 600 features all the best attributes of our original Blinder Road, but now with an incredible 600 lumens of light output. When this increase of illumination power is combined with the carefully considered beam angles for road riding, you have Knog’s most powerfully perfect road bike light ever. Advanced LED's & Optics There is no such thing as a universal bike-light. End-use and even bike type dictate the best bike light to use. Blinder Road utilizes two LEDs, each independently capable of 400lm of output or 600lm when used together. The LHS optic has a 12-degree beam providing a spotlight that is perfect for racing and fast riding on smooth roads, while the RHS Optic has a 32-degree beam proving a flood light which is best suited for use on slower rides on bumpy or uneven riding conditions. Each LED has a variety of flash patterns and functions independent of the other. Unique Fastening System Utilizing silicone to create the elastomeric strap combined with an over-molded polycarbonate clip system allows Blinder Road to adapt to the many various configurations required of today's road cyclists, many of whom have GPS systems on their bikes. The Blinder Road is stylish and versatile enough to fit with a multitude of today's high-end bicycle cockpits (includes two removable silicone straps for bars 22-28mm & 29-35mm). Waterproof & Integrated USB Charging The Blinder road is 100% waterproof with a rating of IP67, which means you submerge your light in depths greater than 1 meter for over 30 minutes without damage (note if you are under 1 meter of water on your bike, the waterproofing of your light is probably the least of your worries). The light is charged via integrated USB, which means it does not require additional cables to charge from a USB Port, and there's no need for single-use batteries. Intuitive Functionality When your Blinder is running low on battery, a red led will light up next to the button. This ring will turn green and then turn off once the Blinder is fully charged and ready to go. With a design that is wider rather than longer, accommodating the 2 optics side by side keeps the center of gravity as close to the handlebar as possible which avoids the potential for movement on bumpy roads. Finally, the Blinder Road's buttons and strap closures are all at the perfect ergonomic angle and are long enough to be used while wearing gloves. - Dimensions: H: 73mm x W: 30mm x L: 53mm - Weight: 95g - Lumens: 600

Mid Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 170 lumens this Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

The PWR Bike Extension Mount is a kit with a handful of mounts, recommended for saving bar space with the PWR Trail and PWR Mountain setups. Use the PWR Bar-To-Frame Mount to hitch a lighthead to your handlebar with the Tri-prong Side Mount (GoPro compatible), and use the Frame Mount to mount a battery to your frame. Use the PWR Brakeboss Extension Mount to attach your Lighthead to the front frame of your bike. - Compatible with the PWR Road, PWR Trail and PWR Mountain light heads - Fits 22.2mm bars up to oversize bars 35mm in diameter - Thumbscrew allows for tightening by hand, or for additional tightening use Allen key - 3 size spacers allow mounting to various bar sizes - Stretched cable length: 80cm - Weight: 190g

Using this strap allows the user to create a headtorch ranging from 1000-2000 lumens, dependent on light head & battery combination. * Note, this product does not include the PWR bank or PWR light head as shown in this image. - 170g

The PWR helmet extension mount is designed for use with the PWR modular lights. Use it to attach the lighthead to your helmet so you can stash the battery in your backpack. - Compatible with the PWR Road, PWR Trail, and PWR Mountain light heads - Internal screw is made of nylon plastic and is designed to snap in case of accidents for rider helmet protection - Fits most vented helmets, common for road and trail cycling - Stretched cable length: 80cm - Weight: 100g

PWR Helmet/GoPro Mount - for holding charger and modular lights on top of helmet (Excludes PWR Mountain). Tri-prong system works with GoPro, so can be used to mount lights under Garmin and other mounts. - Compatibility: Works with PWR Charge and Modular lights (not PWR Mountain) - Mounting system: Designed to fit most vented helmets, common for road and trail cycling and is GoPro compatible - T Slot (For modular): Allows for quick release of the light when parking your bike - Weight: 20g