Parts & Accessories

The Shimano EW-EC300 Charging Cable is compatible with new Shimano 12-speed road Di2 systems. This cable will also recharge the Dura-Ace R9200 and Ultegra R8100 power meter cranksets. 1700mm cable length

Shimano Di2 Frame Junction Box

Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount

All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions

Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Frame Junction Box - Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Junction Box - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/ - SM-EW90-A 3-Port Cockpit Junction Box connects 1 pair of Di2 shifters to the frame junction box via 3 SD50 E-tube wires - OEM front wiring kit for Dura-Ace Di2 9070 - LED battery charge level indicator - Rear Derailleur adjustment mode - Internal Battery charging port - Includes Junction Box Band (CY9082) and Junction Box Hook (Mounting Plate, CY9081)

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano SM-PCE02 link cable for e-tube and Di2 systems.

The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g

Features
- Combo mount for action camera and frontlight for Zipp QuickView Integrated Road Computer Mount (Including bolts)
- SRAM Model ID: ST-SPP-A0

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap

To use with your Bryton, Garmin, or Wahoo computer, the Ritchey Lollipop Accessory Mount allows you to integrate your favorite device with your Ritchey cockpit. Compatible with the Universal Stem Mount and Computer Mount Adapter for the SuperLogic Butano Ridge handlebar, the Lollipop Accessory Mount will also accept a GoPro camera to give you total control over your performance metrics as well as your ride aesthetics.

Free up bar space and secure your GoPro and many other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

Mount your bike computer directly to your ShockStop Suspension Stem. The ShockStop Computer Mount puts your Garmin, Wahoo, Cateye, Joule, Mio, Magellan, or Polar bike computer in perfect position. Two different mounting positions let you fine-tune the fit of your computer and tuck it out of the wind. Benefits: - Conveniently places your computer directly in front of your stem within easy reach - Two different mounting options let you fine-tune the position of your computer Details: - Fits ShockStop Suspension Stem only (Note: using the computer mount with the +30 degree stem will place the computer in a very upright position in line with the stem) - 2 different mounting positions (upper & lower) Compatibility: - Compatible with Garmin Forerunner QR kits - Compatible with Garmin Edge 1000 in portrait and landscape mode (upper position) and landscape mode only for lower position - Compatible with Wahoo Element and Polar in the upper position only

SECURE MOUNTING
Both mounts come with our patented dual-stage lock, which allows you to ride with confidence knowing that your smartphone will stay secure on your bike, no matter the terrain.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Strava®, MapMyRide or Apple® maps. Detach just as easily so you don’t miss a photo opportunity or important call. Remember, it’s all in the technique, not the force.

UNRIVALLED DESIGN
Both mounts are designed for aerodynamics. The Out Front Mount PRO features a lower profile and super rigid anodised aluminium mounting arm. The standard Out Front Mount can be reversed to go over the stem of your bike's handlebars.

Add a coloured lever to style your Quad Lock® Mount to your bike.

WHAT'S INCLUDED
- 1 x Quad Lock® Out Front Mount
- 3 x Spacers for 22mm, 25.4mm and 31.8mm bars (mount suits 35mm bars)
- 1 x Threaded Base Cap
- 1 x 3mm Hex (Allen) Key

TECH SPECS
- Can be reversed for over stem mounting
- Suits handlebar diameters: 22mm, 25.4mm, 31.8mm and 35mm (7/8", 1", 1 1/4", and 1-3/8")
- Stainless steel hardware
- 360 degree mount head rotation
- Compatible with Quad Lock® Camera/Light Adaptor
- Compatible with Quad Lock® Waterproof Wireless Charging Head
- Compatible with all Quad Lock® Cases and Universal Adaptors

SECURE MOUNTING
Both mounts come with our patented dual-stage lock, which allows you to ride with confidence knowing that your smartphone will stay secure on your bike, no matter the terrain.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Strava®, MapMyRide or Apple® maps. Detach just as easily so you don’t miss a photo opportunity or important call. Remember, it’s all in the technique, not the force.

UNRIVALLED DESIGN
Both mounts are designed for aerodynamics. The Out Front Mount PRO features a lower profile and super rigid anodised aluminium mounting arm. The standard Out Front Mount can be reversed to go over the stem of your bike's handlebars.

Add a coloured lever to style your Quad Lock® Mount to your bike.

WHAT'S INCLUDED
- 1 x Quad Lock® Out Front Mount PRO assembled with black lever and hardware
- 3 x Spacers for 22.2mm, 25.4mm and 31.8mm bars (mount suits 35mm bars)
- 1 x Threaded Base Cap
- 1 x 3mm Hex (Allen) Key

TECH SPECS
- Aerodynamic, low profile straight arm
- Black anodised aluminium clamp and arm, made by precision CNC
- Assembled with black lever & hardware
- Suits handlebar diameters: 22mm, 25.4mm, 31.8mm and 35mm (7/8", 1", 1 1/4", and 1-3/8")
- 360 degree mount head rotation
- Compatible with Quad Lock® Light/Camera Adaptor
- Compatible with Quad Lock® Waterproof Wireless Charging Head
- Compatible with all Quad Lock® Cases and Universal Adaptors

Compatible with all Quad Lock® Cases and Universal Adaptors, the Quad Lock® Phone Ring/Stand provides a more secure hold of your phone using the ring, and kickstand for hands free viewing.

Simply insert the Phone Ring/Stand into the back of your Quad Lock® Case or Universal Adaptor until you feel it lock.

Remove just as easy with a simple twist and keep it handy at all times by attaching the Quad Lock® Phone Ring/Stand to your keys using the provided Carabiner.

WHAT'S INCLUDED
- 1 x Quad Lock® Phone Ring/Stand
- 1 x Carabiner

TECH SPECS
- Strong Zinc Alloy design (both Phone Ring/Stand & Carabiner)
- Finger tab for easy pull
- Gun metal finish
- 120 degree hinge (when inserted) for multiple viewing options
- 4mm height so it sits flush in your Quad Lock case or Universal Adaptor
- Weight: 19 g (0.67 oz)
- Please remove the Phone Ring/Stand when using wireless charging.

Obviously you will also have to remove the Quad Lock Phone Ring/Stand from the back of the phone case to mount your Quad Lock.

The Quad Lock® Bike Mount is the lightest, strongest and most secure smartphone bike mount on the market.

SECURE MOUNTING
Featuring a patented dual-stage lock, you can ride with confidence over bumps and jumps knowing that your smartphone isn’t going anywhere your bike isn’t.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps such as Strava®, MapmyRide or Apple® maps as you ride. Detach just as easily so you don’t miss a photo opportunity or important phone call.

SLEEK DESIGN
At just 23mm tall and 35mm wide, the Quad Lock® Bike Mount fits seamlessly onto the stem or handlebar of your bike.

WHAT'S INCLUDED
- 1 x Quad Lock® Stem/Handlebar Mount
- 2 x EPDM mounting o-rings (small)
- 2 x EPDM mounting o-rings (large)
- 2 x Nylon zip ties (black)

TECH SPECS
- Suits bar sizes 25-40mm in diameter
- Glass filled nylon / polycarbonate construction
- Stainless steel fasteners
- 23mm tall and 35mm wide
- Compatible with all Quad Lock Cases and Universal Adaptors

Save space in your bicycle's cockpit with our Quad Lock® Stem Cap Mount or Quad Lock® Stem Cap Mount Adjustable. Both securely install between your bicycle's stem and stem cap, offering compatibility with a large variety of stem angles.

SECURE MOUNTING
These are our lightest and strongest bike mounts. Engineered from ultra-light aircraft-grade aluminium, then rigorously tested for unmatched strength and durability. This high-performance material ensures the mounts remain tough without adding unnecessary weight, making them ideal for cyclists who demand strength and efficiency. With our patented dual-stage lock, you can ride confidently, knowing your smartphone will stay secure, even on the roughest terrain.

SLEEK DESIGN
Crafted from premium aircraft-grade CNC-machined aluminium, with black hardware and a compact black lever, our Stem Cap Mounts offer a minimal and lightweight aesthetic. They install seamlessly between your bike's stem and stem cap, ensuring a clean, unobtrusive look.

OPTIMAL VIEWING POSITION
Both mounts feature a dual-sided head design, allowing you to mount the lever head on either side, offering more flexibility in adjusting your optimal phone viewing position on a variety of stem angles.

The Stem Cap Mount Adjustable features a screw-tightened hinge to hold firmly in place in your preferred viewing angle.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Ride with GPS®, Strava® or maps. Detach just as easily so you don’t miss a photo opportunity or important call.

WHAT'S INCLUDED
- 1 x Quad Lock® Stem Cap Mount Adjustable (with short black lever and black hardware)
- 1 x Allen (Hex) Key

TECH SPECS
- Black anodized aircraft-grade aluminum, forged by precision CNC
- Assembled with short black lever and black hardware for minimalist design aesthetic
- Suits stem diameters 1 1/8" (28.6mm)
- Fits cleanly above the stem and held securely by the stem cap
- Hinged design, tighten in place with included hex key
- Dual-sided, reversible design. Attach the head to either side of the mount for your optimal setup and phone positioning

Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

• Handlebar mount for Garmin Edge 200, 500, and 800 • Fits handlebars 22.2 to 31.8mm (Shims included) • Forged and CNC`d alloy construction

- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts - Accepts GoPro mounting style compatible accessories - GoPro mount rotates 90° for ideal positioning of accessories - Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter - Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter

- CNC machined AL6061 alloy Garmin stem mount - Mounts to a stem`s faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000

- CNC machined AL6061 alloy Garmin/GoPro stem mount - Mounts to a stem's faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000 - Accepts GoPro mounting style compatible accessories

- Lightweight nylon fiber Garmin handlebar mount with 90-degree rotating mounting plate - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000 - Out-front mounting position centers the computer in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter

- Lightweight nylon fiber Garmin handlebar mount with CNC machined AL6061 alloy GoPro mount - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000 - Accepts GoPro mounting style compatible accessories - Out-front mounting position centers the computer and accessories in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter

Protect your pride and joy! The Muc-Off Secure AirTag™ Holder is a super secure way to install an AirTag* to your bike frame using the bottle cage mounting holes, meaning you can track down and locate your steed with the FindMy™ app, should pesky thieves get their hands on it! Your AirTag will be housed in a tough, 4-part polymer holder, which is sandwiched between two aircraft grade 6061 aluminium armour plates to ensure the AirTag is not easy to remove or damage. It comes supplied with 2 sets of security Torx screws and a security key for an extra level of protection. It’s available in the 12 Muc-Off anodized colour options, for you to match your Tubeless Valves or Stealth Tubeless Puncture Plugs for extra style points. Product Information - Size: (L) 85.5 x (W) 35.5 x (D) 10.25mm - Weight: 21g without airtag, 32.2g with airtag - Designed in the UK. Made in China. Features - Easy to install - Can be used with or without an existing bottle cage - Slotted bottle cage mounts are designed to work with most existing standard bottle cage mounts (64mm spacing) and offer more adjustability - Ideally suited to high populous areas such as city centres - Durable, precision machined, 6061 aluminium body - Non-rattle design to hold AirTag* securely in place - Available in 12 anodized colours to match your Muc-Off Tubeless Valves or - Stealth Tubeless Puncture Plug * AirTag not included with mount Included - 1x AirTag Holder (AirTag not included - sold seperately) - 2 x T25 x 25mm security Torx bolts> - 2 x T25 x 16mm security Torx bolts - 1 x Security Key Muc-Off Ltd and any of it’s group / connected companies are not liable for any loss of property or theft in relation to the use of this product. We recommend you use a high quality lock when ever leaving your bike unattended or in your garage or home. AirTag(TM) is a registered trademark of Apple Inc. AirTag™ is a registered trademark of Apple Inc.

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal - Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

- Discreet way to install an Apple AirTag inside your tubeless tire - Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval - AirTag is housed in a 3-part silicone and rubber tubeless valve mount - Sacrificial stem, ensures tracker and rim protection under impact - Silicone top cover protects tracker and internal plug reduces sealant ingress - Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types: - MTB tyres (XC, Enduro Trail, Downhill) - Gravel Tires (the narrowest recommended tyre size is 38mm wide)

Features
- Tablet PC mount on the handlebar
- Holds 7.9 to 9.7 inch screen
- 360 degree rotation
- SM clamp

Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.

- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Removal key for T25 bolts security bolts included - Fits discreetly under a water bottle cage or mounted to accessory top tube bolts

Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers - Not compatible with Edge 1000 series

- An efficient and streamline radar mounting solution, placing your Garmin Varia, Wahoo Trackr, or other compatible rear facing radar directly on your rear rack.

- An efficient and streamline radar mounting solution, placing your Garmin Varia, Wahoo Trackr, or other compatible rear facing radar directly under your saddle, providing the ideal position for optimal vehicle visibility.

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam - Also compatible with Pioneer computers

- Quarter turn adapters for GPS mounts

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

Mounting for Shimano Di2

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

NEW K-EDGE Go Pro Style Top Cap is an ideal position for your camera or light. This mount replaces your top cap with a functional camera/light mount. Not all of these Top Cap mounts are created equal. The precision fit of the K-EDGE Mount is critical to both proper headset compression AND camera security. Whether dropping into a World Cup Downhill descent or simply following your kids on a family ride, enjoy the convenience of this GoPro style mount. - Clean, sleek, (replaces top cap) - Ideal position, centered, above cockpit - Ultimate Enduro, DH, filming platform - Adaptable camera or light mount - CNC Machined, one piece, lifetime warranty - All hardware included

The GO BIG Pro Saddle Rail Mount is designed to lock your Go Pro interface action camera or light securely under your saddle with unquestionable reliability. All-aluminum design improves video clarity by removing the “plastic mount shake.” - Fits all standard 2-rail saddles including oversized carbon rails - Compatible with all GoPro Cameras, and like cameras utilizing the GoPro Interface - Adjustable vertical angle position - Gives the Tour de France Go Pro angle of oncoming riders behind you - The K13-1430 available in anodized Black only. - 38 grams

- Ideal fit for very short stems with steep upward stem angles - 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Garmin computers including Garmin 1040 - CNC machined 6016-T6 aluminum - Weight: 41g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

- For Integrated Handlebar (one piece) bar/stem - Pro-level mount with -7 degree articulation for custom computer positioning - Lifetime warranty. CNC Machined. Black Anodized - GARMIN approved replaceable computer insert protects computer tabs - Combo- Computer and GoPro style camera/light compatible - M5 hardware included. If a smaller bolt required, use an 8.4mm washer to ensure a secure fit. - Made in House. Boise, Idaho USA

- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 47g Compatibility: - GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo compatible (GoPro-style light/camera interface) K13-580-BLK adapter sold separately

- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 50g Compatibility: - All Garmin Cycling Computers - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)

The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.

Hand tight adjustability and 4mm hex wrench lockable. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Combo Mounts, Light&Camera Mounts. - Aluminum knurled thumbscrew - Stainless Steel bolt with 4MM hex feature - Weight: 10g - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already have a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

The K-EDGE Garmin TT Mount is the most advanced Time Trial and Triathlon computer mount available. Featuring a twist-lock mechanism to lock your Garmin with confidence. The K-EDGE Garmin TT Mount’s aluminum design and its unique locking feature is by far the most advanced mount on the market. With traditional TT mounts for the Garmin computer, you have to either have enough room between the extensions to perform the ¼ turn “twist” or the computer has to be mounted above the extensions. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility – 22.2mm diameter TT Extensions - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520*, 800, 1000, and Forerunner 310XT - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. *Garmin 520 is not compatible at this time.

The Top Tube Mount places your computer front and center on the top tube of Gravel, MTB, and Adventure Bikes with preset mounting positions. - Compatible with all Garmin cycling computers - Multi-mount positions - Garmin approved insert protects the computer body tabs in the event of a crash - All hardware included - CNC machined in Boise, Idaho USA - Made in USA - Lifetime warranty

The Top Tube Mount places your computer front and center on the top tube of Gravel, MTB, and Adventure Bikes with preset mounting positions. - Compatible with all Wahoo cycling computers - Multi-mount positions - Wahoo approved insert protects the computer body tabs in the event of a crash - All hardware included - CNC machined in Boise, Idaho USA - Made in USA - Lifetime warranty

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. - Far and away more advanced than the plastic options on the market - Boost Stem Mount is specifically designed to fit atop the shortest stems on the market today - The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc - The mount replaces a standard 5mm spacer and is locked securely in place by the top cap compression system - Compatibility: Wahoo ELEMNT, Wahoo Roam, Wahoo Bolt, Wahoo MINI - CNC-machined aluminum for low weight and strength - Made in the USA with a lifetime warranty - Stem mount that is for short, steep stem angles boosting the computer up above by 1cm